2 ton 2000kg 24V battery powered seat electric reach truck forklift lift 3m-6m

2 ton 2000kg 24V battery powered seat electric reach truck forklift lift 3m-6m

Most of the reach trucks are driven by electric motors, so they have low noise, no pollution, high energy conversion rate, and belong to the green environmental protection vehicles, and do not need to add fuel, and the cost cost is low. In line with the current concept of green environmental protection. When loading and unloading goods, the gantry can be extended out, and the gantry can be contracted back when walking, which can reduce the turning radius of the forklift and improve the stability of the forklift in operation. At the same time, it has two legs that extend forward, and the legs are high, and there are two wheels at the front end, which ensures the stability of the forklift when loading. The lifting capacity of the forklift is relatively small, and its gantry can take the lifting mechanism to migrate along the track on the inside of the legs, which is convenient for picking up the goods. When the gantry rises to the front, the center of gravity of the load is on the outside of the pivot point; when the gantry is withdrawn, the center of the load is back to the inside of the pivot point; therefore, the forward forklift truck has the advantage of flexibility in operation, and it has the advantage of high loading.

1. Forward movement function: a reach forklift has a unique forward movement function that allows it to operate in tight spaces, thus being able to provide more maneuverability and flexibility when needed.
2. Confined space: Due to the forward shift function of the reach truck, it is suitable for use in confined spaces, such as warehouses with dense stacking of goods, narrow aisles between shelves, etc. The reach truck can be used in environments with dense stacking of goods. Applied to the environment with dense stacking of goods, it can be more convenient to dispatch and move goods.
3. Equipped with electronic drive wheels, making the operation more flexible and convenient, with turning deceleration function.
4.280Ah large-capacity battery can be used for long time work, and the side-pull battery can be replaced at any time.
5. One-piece forged forks with stronger load bearing, forks with up and down swing function, suitable for all kinds of single-sided, double-sided, tic-tac-toe and chuan-tac-toe pallets.
6. Flexibility: Front shift forklift trucks are able to travel and steer freely in the narrow space, which greatly improves the handling efficiency.

 Working Principle of Reach Truck
The gantry or fork carrier of the reach truck can move back and forth, in which the gantry reach truck means the gantry drives the fork to move forward during operation, extends beyond the front wheels to pick up or put down the goods, and the fork retracts with the goods to make the centre of gravity of the goods in the support plane when walking; while the fork reach truck means the rack drives the fork to move forward to beyond the front wheels to carry out the operation, and the fork carrier drives the fork to retract into the support plane when walking.
Forward-moving forklift trucks have two forward-extending outriggers, which are higher and have two wheels at the front end of the outriggers, and the function of the outriggers is to ensure the stability of the forklift trucks when they are loaded. Comparing with the plug-in forklift truck, the front wheels are bigger and the outriggers are higher, the outriggers can not be inserted into the bottom of the goods during operation, while the gantry can move along the track on the inside of the outriggers with the whole lifting mechanism, so that the forks can be retracted after taking the goods and lifting them up a little bit, which can ensure the stability of the forklift truck when it is in operation.
The gantry of the reach truck can move forward along the track on the inner side of the outrigger, which is convenient for picking up the goods. After picking up the goods, the gantry rises to a certain height, and the gantry can return to the original position along the inner track of the outriggers, so that the centre of gravity of the goods is in the front and rear support legs of the vehicle, and therefore the stability is very good. It is suitable for operation in workshop and warehouse. The gantry of the front shift forklift truck can move forward with the lifting mechanism along the track on the inner side of the outrigger, which is convenient for picking up the goods. After picking up the goods, after lifting up a small height, the gantry returns to the original position along the track on the inner side of the outrigger.