Seat Mounted Lifting 3500mm Walkie Reach Stacker Forklift Electric Side Shifter Forklift

Seat-mounted lifting height 3500 mm electric reach trucks with side shift

Most of the reach trucks are driven by electric motors, so they have low noise, no pollution, high energy conversion rate, and belong to the green environmental protection vehicles, and do not need to add fuel, and the cost cost is low. In line with the current concept of green environmental protection. When loading and unloading goods, the gantry can be extended out, and the gantry can be contracted back when walking, which can reduce the turning radius of the forklift and improve the stability of the forklift in operation. At the same time, it has two legs that extend forward, and the legs are high, and there are two wheels at the front end, which ensures the stability of the forklift when loading. The lifting capacity of the forklift is relatively small, and its gantry can take the lifting mechanism to migrate along the track on the inside of the legs, which is convenient for picking up the goods. When the gantry rises to the front, the center of gravity of the load is on the outside of the pivot point; when the gantry is withdrawn, the center of the load is back to the inside of the pivot point; therefore, the forward forklift truck has the advantage of flexibility in operation, and it has the advantage of high loading.

1. Forward movement function: a reach forklift has a unique forward movement function that allows it to operate in tight spaces, thus being able to provide more maneuverability and flexibility when needed.
2. Confined space: Due to the forward shift function of the reach truck, it is suitable for use in confined spaces, such as warehouses with dense stacking of goods, narrow aisles between shelves, etc. The reach truck can be used in environments with dense stacking of goods. Applied to the environment with dense stacking of goods, it can be more convenient to dispatch and move goods.
3. Equipped with electronic drive wheels, making the operation more flexible and convenient, with turning deceleration function.
4.280Ah large-capacity battery can be used for long time work, and the side-pull battery can be replaced at any time.
5. One-piece forged forks with stronger load bearing, forks with up and down swing function, suitable for all kinds of single-sided, double-sided, tic-tac-toe and chuan-tac-toe pallets.
6. Flexibility: Front shift forklift trucks are able to travel and steer freely in the narrow space, which greatly improves the handling efficiency.

Side-shift function of reach truck
The side-shift function of a reach truck is a valuable feature that enhances its versatility and efficiency in material handling operations. Side-shift allows the operator to laterally adjust the position of the forks or load carriage while the truck remains stationary. Here's how the side-shift function works and its benefits:

Mechanism:

The side-shift mechanism typically consists of hydraulic cylinders mounted on the fork carriage or load carriage of the reach truck. These cylinders are controlled by the operator using the truck's controls, usually located on the operator's console or tiller handle.
When activated, the hydraulic cylinders extend or retract, allowing the forks or load carriage to move sideways within a certain range. This lateral movement can be finely controlled by the operator to position the forks precisely relative to the load or pallet.
Benefits:

Precise Load Placement: Side-shift enables the operator to precisely position the forks or load carriage relative to the load or pallet, even when the truck cannot be positioned directly in front of it. This helps ensure accurate placement of loads onto racks or pallets and reduces the need for repositioning.
Improved Efficiency: With side-shift, operators can quickly adjust the position of the forks or load carriage without having to reposition the entire reach truck. This saves time and effort, particularly in applications where frequent adjustments are required, such as loading and unloading pallets.
Reduced Damage: By allowing for precise alignment with the load, side-shift helps reduce the risk of accidental damage to both the load and the racking system. It minimizes the likelihood of collisions between the forks and the pallet or racking components.
Enhanced Safety: Side-shift can also contribute to safety by enabling operators to maintain a safe distance from obstacles or obstructions while positioning the load. It allows for better visibility and maneuverability, reducing the risk of accidents or injuries.
Applications:

Side-shift is particularly useful in applications where precise load placement is critical, such as stacking pallets in narrow aisles or organizing inventory in high-density storage racks.
It is commonly used in warehouses, distribution centers, manufacturing facilities, and other material handling environments where reach trucks are deployed for pallet handling and stacking operations.
 

Overall, the side-shift function of a reach truck offers operators greater flexibility, efficiency, and precision in material handling tasks. It helps improve productivity, reduce the risk of damage, and enhance safety in the workplace.